Air Conditioner Repair
Diagnosis and repair when a system will not cool, will not start, or stops partway through the day.
Polar AC Services inspects, repairs, installs and maintains home air-conditioning systems. Call to describe what your AC is doing and we will take it from there.

From a unit that will not start to a system that is due for replacement, these are the residential AC services Polar AC Services handles in Ozone Park, NY.
Diagnosis and repair when a system will not cool, will not start, or stops partway through the day.
Inspection and service of ducted systems, including the air handler, coil, blower and outdoor unit.
Equipment selection and installation for homes that need a new cooling system or an added zone.
Replacement of aging or failed equipment, with the repair-versus-replace question explained clearly.
Service for wall-mounted indoor heads and their outdoor units, including cleaning and operation checks.
Seasonal checks of filters, coils, drains, controls and airflow to keep a system in working order.
Testing, wiring checks and replacement when the thermostat does not match what the system is doing.
Inspection of the fan, coil, contactor and cabinet on the outdoor unit.
Checks for dirt buildup, ice and drain problems on the indoor coil.
Pressure and temperature readings to find out why a system is not cooling as expected.
Testing of capacitors, contactors, relays, wiring and control boards.
Looking at filters, blowers, vents and ducts when rooms are warm, weak or uneven.
The same symptom can have several causes. This is the type of inspection that usually comes first.
Thermostat settings, a dirty coil, airflow, outdoor unit operation and refrigerant-system readings are checked.
Filter condition, blower operation, blocked vents and duct restrictions are inspected.
Duct layout, airflow balance, vents and the thermostat location are reviewed.
Controls, thermostat, airflow, coil condition and electrical components are tested.
Fan motors, the blower, the compressor and loose panels are checked to find the source.
The condensate drain, drain pan and evaporator coil are inspected for clogs or ice melt.
Airflow, filter condition and refrigerant-system readings are checked as possible causes.
Power, wiring, settings and calibration are tested against what the equipment does.
Power supply, capacitor, contactor, fan motor and compressor operation are tested.
Filters, coils, airflow and system readings are compared with normal operating conditions.

Polar AC Services serves homeowners in Ozone Park, NY. Every job starts by listening to what the system is doing, then looking at the equipment itself: thermostat, filter, indoor unit, outdoor unit and electrical connections.
Diagnosis comes before repair. Measurements and visual checks show whether the cause is a worn part, a dirty component, an airflow restriction or a refrigerant-system issue, so the repair matches the problem.
Regular maintenance helps keep a system in good working order. When equipment is worn out or repairs stop making sense, we explain the options for replacement so the decision is clear.
Every visit starts with a phone call. Call 929-871-3729 and describe what the system is doing, and we will tell you what we need to check and what to expect before we arrive.
Cooling comes from several parts doing different jobs. If one of them is not working properly, the whole system can be affected.
Reads room temperature and signals the system to start or stop.
Houses the blower and evaporator coil inside the home.
Absorbs heat and moisture from the air passing over it.
Moves air across the coil and through the ducts.
Catches dust before it reaches the coil and blower.
Carries cooled air to rooms and returns warm air to the unit.
Carries heat from the indoor coil to the outdoor unit.
Releases the collected heat outside the home.
Pressurizes and circulates refrigerant through the circuit.
Capacitors, contactors and boards start and coordinate the equipment.
In short: the thermostat calls for cooling, the blower pulls warm air across the cold evaporator coil, and the refrigerant carries that heat to the outdoor condenser, where the compressor and fan send it outside. Cooled air returns to the rooms through the ducts.
A maintenance visit is a structured check of the parts that affect cooling and airflow. It helps catch worn or dirty components early, though it cannot prevent every breakdown.
What is needed depends on the age, type and condition of your equipment.

A simple, straightforward process from first call to finished work.
Tell us what the system is doing, when it started and what you have noticed.
We check the thermostat, indoor unit, outdoor unit, airflow and electrical parts.
We explain what we found and what it means for your system.
Repair, maintenance or replacement, based on what the inspection showed.
We work on residential air-conditioning systems for homeowners in Ozone Park, NY. If your AC is not cooling the way it should, call and tell us about it.
Call us to describe the problem or to ask about maintenance and installation.
Polar AC Services
Ozone Park, NY
Monday to Sunday — 7:00 AM to 8:00 PM